Version:
Sturdy compact one-armed torque wrench, adjustable to scale and self-triggering.
The accuracy is sustained for many thousands of operations, because high quality material is used for all wearing parts with stressed parts loaded only briefly on each occasion.
Body and handle are of sturdy square section.
Scales adjustable.
Anti-clockwise tightening by pushing through the drive shankWithout any plug-in head (basic model); see No.
657582 − 657950 for suitable plug-in heads.
Units of measure:
Nm, lbfft.
Advantage:
Ergonomically shaped two-component handle, resistant to aggressive liquids such as fuel, Skydrol etc.
The adjustment scale is placed behind a sight glass for protection against dirt and damage.
Quick, precise, and reliable setting:
Pull the setting knob, “Twist” to set the desired value and “Press” to save it.
Setting knob moves easily since there is no spring pressure to be overcome.
Function:
If the set value is reached while using the wrench, the wrench triggers giving a “signal” (acoustic and perceptible) and is then immediately ready for use again.
Application:
Since the set torque can be varied, it is ideal for repairs and short series production.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
-----------

maximum torque
200 Nm

Direction of tightening
For right and left-hand tightening

Torque measuring accuracy
±3 %

Exchangeable tool
Plug-in head

Test certificate
Manufacturer’s test certificate

Calibration
O1

Series
MANOSKOP 730N

Overall length L
467 mm

Torque range
40 Nm - 200 Nm

Torque range
30 lbfft - 150 lbfft

Scale graduation, 1 graduation =
1 Nm

Weight
1,264 g

Adjusted reference dimension on the torque wrench [l2]
25 mm

Socket for plug-in head
14×18 mm

Display
analogue

Release signalling
akustisk; haptisk

Trigger principle
mechanical short-travel release

Connection format
for plug-in heads (rectangular socket)

Measurement technology
mechanical

Data can be recorded
no

Setting the trigger value
with adjustment scale

Feedback
triggering

Reversible reading
Nm; lbfft

Measurement process
Torque

Adjustable trigger value
adjustable

Standard
DIN EN ISO 6789

Lever length without plug-in head [l1]
424 mm

Lever length including factory calibration reference dimension [l3]
449 mm

Type of product
Torque Wrench
Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....