Version:
Version suitable for NC similar to DIN 8093 with straight shank ⌀ for standard chucking especially in hydraulic chucks or high precision collet chucks.
This gives very high concentricity and process reliability when manufacturing H7 fits.
No need to procure special collets when using GARANT NC reamers.
With long flutes and left-hand helix.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction.
Lead taper is suitable also for blind holes.
Note:
For reamers like No.
164340 and 164341 but with other diameters and fits see No.
164344 and 164345.
-----------
Nominal ⌀ DC
1.48 mm
Coating
uncoated
Bore ⌀ tolerance
H7
Tool material
Solid carbide
Standard
Manufacturer’s standard
Through-coolant
no
Shank
DIN 6535 HA with h6
Application for type of drilling
for through holes
Flute length Lc
9 mm
Overhang L1
16 mm
Overall length L
50 mm
Number of cutting edges Z
3
Shank ⌀ Ds
4 mm
Feed f in steel < 1100 N/mm2
0.08 mm/rev.
recommended drill ⌀ in steel < 1100 N/mm2
1.4 mm
Shank tolerance
h6
Colour ring
green
Type of product
Phillips bit
Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....